中国空间科学技术 ›› 2012, Vol. 32 ›› Issue (3): 35-42.doi: 10.3780/j.issn.1000-758X.2012.03.006

• 研究探讨 • 上一篇    下一篇

星载天线传感器优化部署的均匀设计方法

 李文博, 王有懿, 赵志刚, 赵阳   

  1. (哈尔滨工业大学航天学院,哈尔滨 150001)
  • 收稿日期:2011-09-07 修回日期:2012-06-25 出版日期:2012-06-25 发布日期:2012-06-25
  • 作者简介:李文博 1984年生,2008年获哈尔滨工业大学人机与环境工程专业硕士学位,现为哈尔滨工业大学航空宇航科学与技术专业博士研究生。研究方向是航天器机构动力学建模、模态参数辨识与控制。
  • 基金资助:

    国家自然科学基金(50975056,11072066)资助项目

Uniform Design Method of Optimal Sensor Deployment for Satellite Antenna

 LI  Wen-Bo, WANG  You-Yi, ZHAO  Zhi-Gang, ZHAO  Yang   

  1. (School of Astronautics, Harbin Institute of Technology, Harbin 150001)
  • Received:2011-09-07 Revised:2012-06-25 Published:2012-06-25 Online:2012-06-25

摘要: 为提高模态密集大型星载天线在轨模态参数辨识精度,提出基于均匀设计的遗传算法对传感器数量和位置进行优化部署。根据模态空间H2范数确定参振模态阶数;分别以测量信息正交性和能量最大为优化目标,引入均匀设计方法对传感器数量、种群规模、交叉概率和变异概率4个组合参数进行选取;采用特征实现算法进行在轨模态参数辨识研究。数学仿真表明:所提出的方法可以有效解决传感器数量和位置的优化部署问题,避免了以往人为经验选取参数时存在的主观性和盲目性问题。

关键词: H2范数, 均匀设计, 模态参数辨识, 传感器优化部署, 星载天线

Abstract: In order to improve the precision of modal parameter identification for large close mode satellite antenna reflector, the genetic algorithm based on uniform design method was proposed to optimize the numbers and locations of sensors. The order of observed modal shape was selected by the energy criterion based on H2 norm in modal space. According to the largest orthogonality and the highest energy of measured information as the optimal objectives respectively, the uniform design method was introduced to optimize the four compounding parameters in genetic algorithm, including: sensor number, population size, probability of crossover and mutation. The eigensystem realization algorithm (ERA) was utilized in on-orbit modal identification. The numerical simulation results show that the proposed method can solve the problem of optimizing the numbers and locations of the sensors effectively, and avoid the blindness in parameters selection.

Key words: H2 norm, Uniform design, Modal parameter identification, Optimal sensor deployment, Satellite antenna