Configuration Parameter Design for ADAM-type Articulated Mast Based on Maximizing Specific Stiffness

doi:10.3780/j.issn.1000-758X.2013.04.007

Abstract

Abstract: The performances of the ADAM-type mast, such as mass, packaging size, stiffness and strength, are determined by its configuration parameters. A new design of configuration parameters based on maximizing specific stiffness was presented. By MATLAB and ANSYS joint simulation，the varying of specific stiffness with different configuration parameters was analyzed. The simulation results show that the optimum value of the length ratio of longeron to batten and the canister radius increases with the increase of the length of mast, when the length of ADAM-type varies in the range of 20 to 100 meters. While the length of mast is 20, 60, and 100 meters, the optimum value of the canister radius varies from 0.3 to 0.4 meter, 0.5 to 0.7 meter and 0.6 to 0.9 meter respectively. The design flow of configuration parameter based on maximizing specific stiffness is as follow: the canister radius is settled at first, then the length ratio of longeron to batten should be determined, and the number of longitudinal member could be finally settled. By this method, configuration parameters of the mast in the SRTM program are designed, and the results approximate to that of ADAM′s.

Key words: Able deployable articulated mast, Specific stiffness, Configuration, Modal analysis, Optimization, Spacecraft

LI Biao, CHENG Gang, LIU Zhi-Quan, DING Feng. Configuration Parameter Design for ADAM-type Articulated Mast Based on Maximizing Specific Stiffness[J]. Chinese Space Science and Technology, 2013, 33(4): 47-54.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: https://journal26.magtechjournal.com/kjkxjs/EN/10.3780/j.issn.1000-758X.2013.04.007

https://journal26.magtechjournal.com/kjkxjs/EN/Y2013/V33/I4/47

[1]	CHEN Lue, LU Weitao, WANG Xiaoyang, ZHANG Yujia, MAN Haijun, HAN Songtao. Spacecraft movement monitoring method and verification based on radio measurement [J]. Chinese Space Science and Technology, 2025, 45(4): 176-182.
[2]	MENG Qingliang, WEI Guanglang, YU Feng, YANG Tao, ZHAO Zhenming, ZHU Xu. Performance analysis of on-orbit testing of mechanically pumped two-phase loop for spacecraft [J]. Chinese Space Science and Technology, 2025, 45(4): 70-78.
[3]	WEI Yaming, ZOU Jianfeng, HUANG Xiaotao. Analysis of engineering challenges and solutions for organ-on-a-chip applications in space [J]. Chinese Space Science and Technology, 2025, 45(3): 67-76.
[4]	YANG Chengxu, ZHAO Zhijun, WANG Yaobing, WANG Jie, WANG Lihua. Design of continuum robot for space capture [J]. Chinese Space Science and Technology, 2025, 45(3): 89-99.
[5]	LIU Jianghui, PENG Qibo, WU Xinfeng. An optimal control strategy for spacecraft approaching along a designated straight direction [J]. Chinese Space Science and Technology, 2025, 45(3): 110-119.
[6]	WANG Ziming, LI Ming, YAO Jinming, QI Chaoqun, ZHANG Huibo, ZHANG Hao. Identification of center of mass for gravitational wave detection spacecraft based on periodical micro incentives [J]. Chinese Space Science and Technology, 2025, 45(3): 120-130.
[7]	ZHANG Yanlong, LI Lifang, XIA Zhou, GUO Pengzhen. Off-axis conjugate focusing optimization method based on aberration compensation [J]. Chinese Space Science and Technology, 2025, 45(2): 15-24.
[8]	ZOU Yuanjie, DENG Runran, SHI Jixin, GE Dongming. Engineering simplified approach to the general formulation for the dynamics of flexible spacecraft [J]. Chinese Space Science and Technology, 2025, 45(2): 70-78.
[9]	WANG Qinglei, CHEN Yaxin, ZHANG Xin, YANG Luwei, SUN Dewei, HUANG Qiaolin, SHI Chuang, LIN Yuhui. Design and analysis of extension support mechanism for space optical remote sensing camera [J]. Chinese Space Science and Technology, 2025, 45(2): 94-102.
[10]	PAN Ning, GENG Hai, GUO Ning, QU Furao, XUE Jiaqiang, MENG Wei, LIU Kun. Simulation and performance optimization analysis of ionic liquid electrospray thruster [J]. Chinese Space Science and Technology, 2025, 45(2): 103-113.
[11]	FENG Tao, ZAHNG Qingjun, LIN Kunyang, WANG Lipeng, ZHANG Qiao, YANG Jungang, XIAO Yong. System design of spaceborne large aperture perimeter truss antenna [J]. Chinese Space Science and Technology, 2025, 45(1): 24-33.
[12]	XU Deyu, WANG Guoyun, MENG Fankong, ZHAO Junming. Variable-emittance space radiator based on near-field thermal radiation [J]. Chinese Space Science and Technology, 2025, 45(1): 81-87.
[13]	YIN Yizhen, KANG Guohua, WU Junfeng, HUA Yinmiao, CHENG Xunlong. Optimal orbit design for interception space targets by thin film spacecraft [J]. Chinese Space Science and Technology, 2024, 44(6): 98-107.
[14]	MENG Henghui, XU Yawei, HAN Dongyang, LIU Xin, GENG Liyin, ZHANG Qingjun, LIU Liping, ZHANG Hongxing, WANG Yuying. Design and verification of loop heat pipe coupling heat system based on brazing technology [J]. Chinese Space Science and Technology, 2024, 44(5): 57-65.
[15]	ZHENG Xinyu, ZHANG Yi, ZHOU Jie, TANG Peijia, PENG Shengren, DANG Zhaohui. Improvement and application of MCTS in turn-based orbital games [J]. Chinese Space Science and Technology, 2024, 44(5): 75-82.

Configuration Parameter Design for ADAM-type Articulated Mast Based on Maximizing Specific Stiffness

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments