中国空间科学技术

中国空间科学技术 ›› 2019, Vol. 39 ›› Issue (5): 8-.doi: 10.16708/j.cnki.1000-758X.2019.0035

• 研究探讨 • 上一篇    下一篇

空间充气薄膜衍射成像结构的热力耦合分析

 孙向伟, 徐彦, 王培栋, 方琴, 朱东方   

  1. 1.浙江大学先进技术研究院，杭州310027
    2.浙江大学航空航天学院，杭州310027
    3.上海航天控制技术研究所，上海200233
    4.上海市空间智能控制技术重点实验室，上海200233
  • 出版日期:2019-10-25 发布日期:2019-10-25

Thermalstructural coupling analysis of space inflatable
membrane diffraction imaging structures

 SUN  Xiang-Wei, XU  Yan, WANG  Pei-Dong, FANG  Qin, ZHU  Dong-Fang   

  1. 1.Advanced Technology Research Institute, Zhejiang University, Hangzhou 310027, China
    2.School of Aeronautics and Astronautics, Zhejiang University, Hangzhou 310027, China
    3.Shanghai Aerospace Control Technology Institute,Shanghai 200233,China
    4.Shanghai Key Laboratory of Space Intelligent Control Technology,Shanghai 200233,China
  • Published:2019-10-25 Online:2019-10-25

PDF (PC)

168

摘要： 随着空间光学技术的发展，衍射成像系统成为空间光学领域的研究热点。提出了一种充气薄膜衍射成像结构设计方案，针对其在空间热载荷作用下的热力耦合效应开展研究。建立了充气薄膜衍射成像结构的热力耦合顺序分析框架，基于IDEAS和ANSYS软件二次开发技术，实现了热力耦合数值分析，得到了结构在轨运行时的瞬态温度场、热应力、热变形等。分析结果表明，充气支撑结构产生了较大热变形，但最大热应力远小于聚酰亚胺薄膜材料的抗拉强度，而镜面中心处没有出现较大的热变形响应，为充气薄膜衍射成像结构的防热设计提供了技术支持。

关键词: 薄膜衍射成像结构, 充气展开, 热力耦合分析, 瞬态温度场, 热变形, 空间光学

Abstract: With the development of space optical technology, diffraction imaging system has become a research hotspot in the field of space optics. In this paper, a structural design scheme of an inflatable membrane diffraction imaging structures is presented. Thermodynamic coupling effects of inflatable structures under the space thermal environment were studied. A coupled thermalstructural sequence analysis framework for inflatable structures was developed. The thermalstructural coupling analysis of the inflatable structure was realized by IDEAS and ANSYS secondary development technology. The transient heat transfer, thermal stress and thermal deformation of the structures in orbit were investigated. The results show that there is large thermal deformation in the inflatable support structures, but the maximum thermal stress is much less than the tensile strength of the polyimide membrane,and there is no large thermal deformation response at the center of the structures. The technology support for thermal protection design of inflatable membrane diffraction imaging structures is provided.

Key words: membrane diffraction imaging structures, inflatable deployment, thermalstructural coupling analysis, transient heat transfer, thermal deformation, space optics